|
|
Copies of published standards may be purchased from:
ANSI, 25 West 43rd Street, New York, NY
10036, Tel: 212 642-4900,
or
Global Engineering Documents,
15 Inverness Way East, Englewood, CO 80112-5704, Phone: 800 854-7179, outside USA
and Canada: 303 792-2181, International Sales Fax: 303 397-2740.
|
| Title | Sub. Date |
|
INCITS 452-2008 (D1699): AT Attachment 8 - ATA/ATAPI Command Set
This standard specifies the AT Attachment command set between host systems and storage devices. It provides a common command set for systems manufacturers, system integrators, software suppliers, and suppliers of intelligent storage devices. It includes the PACKET feature set implemented by devices commonly known as ATAPI devices. This version integrates ANSI Editor and public review comments.
|
09/16/08
|
|
INCITS 451:2008 (D1700): AT Attachment – 8 Architecture Model
This standard describes the AT Attachment Architectural Model. The purpose of the architecture model is to provide a common basis for the coordination of ATA standards and to define those aspects of ATA system behavior that are independent of a particular technology and common to all implementations.
|
05/28/06
|
|
INCITS 407-2005 (1572D): BIOS Enhanced Disk Drive Services - 3
This standard specifies extends the definitions provided in 1484D BIOS Enhanced Disk Drive Services -2.
|
11/05/04
|
|
INCITS 397-2005 (1532D): AT Attachment with Packet Interface - 7 Volume 3
This standard specifies the AT Attachment Interface between host systems and storage devices. It provides a common attachment interface for systems manufacturers, systems integrators, and suppliers of intelligent storage devices. It includes the Packet Command feature known as the AT Attachment Packet Interface (ATAPI). This standard maintains a high degree of compatibility with the AT Attachment - 6 with Packet Interface (ATA/ATAPI-6), 1410D, and while providing additional functions, is not intended to require changes to presently installed devices or existing software.
|
04/21/04
|
|
INCITS 397-2005 (1532D): AT Attachment with Packet Interface - 7 Volume 2
This standard specifies the AT Attachment Interface between host systems and storage devices. It provides a common attachment interface for systems manufacturers, systems integrators, and suppliers of intelligent storage devices. It includes the Packet Command feature known as the AT Attachment Packet Interface (ATAPI). This standard maintains a high degree of compatibility with the AT Attachment - 6 with Packet Interface (ATA/ATAPI-6), 1410D, and while providing additional functions, is not intended to require changes to presently installed devices or existing software.
|
04/21/04
|
|
INCITS 397-2005 (1532D): AT Attachment with Packet Interface - 7 Volume 1
This standard specifies the AT Attachment Interface between host systems and storage devices. It provides a common attachment interface for systems manufacturers, systems integrators, and suppliers of intelligent storage devices. It includes the Packet Command feature known as the AT Attachment Packet Interface (ATAPI). This standard maintains a high degree of compatibility with the AT Attachment - 6 with Packet Interface (ATA/ATAPI-6), 1410D, and while providing additional functions, is not intended to require changes to presently installed devices or existing software.
|
04/21/04
|
|
INCITS 370-2004 (1510D): ATA Host Adapter Standards
This standard specifies an Open Host Controller Interface for ATA host adapters. Different types of host adapters, methods for their identification, and the programming interfaces used are defined.
|
01/17/03
|
|
INCITS 361-2002 (1410D): AT Attachment - 6 with Packet Interface (ATA/ATAPI - 6)
This standard specifies the AT Attachment Interface between host systems and storage devices. It provides a common attachment interface for systems manufacturers, systems integrators, and suppliers of intelligent storage devices. It includes the Packet Command feature known as the AT Attachment Packet Interface (ATAPI). This standard maintains a high degree of compatibility with the AT Attachment - 5 with Packet Interface (ATA/ATAPI-5), 1321D, and while providing additional functions, is not intended to require changes to presently installed devices or existing software.
|
02/26/02
|
|
INCITS 363-2002 (1484D): BIOS Enhanced Disk Drive Services - 2
This standard specifies extends the definitions provided in 1386D BIOS Enhanced Disk Drive Services. It provides definition for Packet Sending Service and extends the types of buses and devices that can be controlled by EDD services.
|
02/21/02
|
|
INCITS 346-2001 (1367D): Protected Area Run Time Interface Extension Services (PARTIES)
This standard specifies a firmware (BIOS) interface for accessing an area of ATA drives that is normally hidden via the SETMAX command. This firmware interface builds on ATA/ATAPI-4 (INCITS 317-1998) to provide services that an operating system may use to access the hidden area in the same manner as a removable media device. This standard provides these capabilities using the existing ATA/ATAPI-4 command set, therefore it does not require changes to existing devices that support the optional SETMAX command. This also describes the Boot Engineering Extension Record (BEER).
|
09/30/00
|
|
INCITS 347-2001 (1386D): BIOS Enhanced Disk Drive Services
This standard specifies extensions to the INT 13 interface. This standard maintains a high degree of compatibility with the Enhanced BIOS Services for Disk Drives, INCITS TR-21, and while providing additional functions, is not intended to require changes to presently installed devices or existing software.
|
09/28/00
|
|
INCITS 340 (1321D): AT Attachment - 5 with Packet Interface (ATA/ATAPI - 5)
This standard specifies the AT Attachment Interface between host systems and storage devices. It provides a common attachment interface for systems manufacturers, systems integrators, and suppliers of intelligent storage devices. It includes the Packet Command feature known as the AT Attachment Packet Interface (ATAPI). This standard maintains a high degree of compatibility with the AT Attachment - 4 with Packet Interface Extension (ATA/ATAPI-4), 1153D, and while providing additional functions, is not intended to require changes to presently installed devices or existing software.
|
02/29/00
|
|
INCITS 317-1998 (1153D): AT Attachment - 4 with Packet Interface Extension (ATA/ATAPI - 4)
This standard specifies the AT Attachment Interface between host systems and storage devices. It provides a common attachment interface for systems manufacturers, systems integrators, and suppliers of intelligent storage devices. It includes the Packet Command feature known as the AT Attachment Packet Interface (ATAPI). This standard maintains a high degree of compatibility with the AT Attachment - 3 Interface (ATA-3), X3.298-1996, and earlier definitions of the AT Attachment Packet (ATAPI), and while providing additional functions, is not intended to require changes to presently installed devices or existing software.
|
08/19/98
|
|
1248D: 1394 to AT Attachment - Tailgate
This standard specifies a bridge protocol between 1394 host systems and storage devices using the AT Attachment Interface. It provides a common attachment interface for systems manufacturers, system integrators, software suppliers, and suppliers of intelligent storage devices.
|
10/28/97
|
|
2008D: AT Attachment - 3 Interface (ATA-3) (Withdrawn 2002)
|
01/17/97
|
|
948D: AT Attachment Interface with Extensions (ATA-2) (Withdrawn 2001)
|
03/18/96
|
|
791D: AT Attachment Interface for Disk Drives (ATA-1) (Withdrawn 1999)
|
01/01/94
|
|
|
|
|
|
Copyright ©
, Technical Committee T13 AT
Attachment. All rights reserved.
Last update on
|
|
|